Lull Discus Launch Glider - Time Lapse Build

In this video I'll show you a time lapse build of the Lull DLG from FlightPoint. The Lull is a beginner-friendly discus launch glider with a wing span of 1.2m designed for 2-channel control, meaning rudder and elevator.
The kit includes laser-cut balsa & plywood parts, carbon fiber rods & tubes, accessories pack (wing bolts, tailplane bolts, pull cable, crimp tubes, 3D-printed tailplane mount, CNC GF control horns, etc.) and a full-size printed plan.
If you check the definition of the word "Lull" you'll see that the name say's it all: A lull is a period of quiet or calm in a longer period of activity or excitement.
So the Lull is designed for relaxing RC flying with a low level of technical equipment involved, most importantly without a motor, purely relying on the skills of the pilot in discus launching the plane, finding and using thermals.

Link to FlightPoint: https://flightpoint.co/
Direct link for ordering the Lull: https://flightpoint.co/product/lull-balsa-1-2m-dlg/
Link to the assembly guide: https://flightpoint.co/diy-dlg-glider-the-lull/

Link to my Lull Flight Video: Coming soon...

Other interesting video links:

Link to my RESilience build video (for the tutorial on how to make tape hinges - check at 1:21:07): https://www.youtube.com/watch?v=Lou7lhc9PJQ#t=1h21m7s
Link to my RO-SPIDER Multitool video: https://youtu.be/A7wjm3LizD4
Link to the tutorial for making a tape loop hatch holder: https://youtu.be/51VhWBr-ZUA

Specs:
Wingspan: 1195mm
Length: 830mm
Wing Dihedral: 11°
Weight (AUW): 179g (in my configuration) incl. 11g GPS Logger
RC functions: rudder, elevator

My configuration:
Battery: TATTU-LiPo, 1S/600mAh, 3.7V, 30C, 60x19x8mm, 15.7g
Receiver: Graupner GR-12L HoTT, 6 channel
Servos: 2x Chaservo DS-06
GPS Logger: SM GPS logger 3

Covering film:
ORALIGHT transparent orange (31-069)
ORALIGHT black (31-071)
ORACOVER Hotmelt Adhesive (960)
ORACOVER Thinner for Hotmelt Adhesive (980)

Vinyl:
Optional Vinyl Stickers for the Lull: https://flightpoint.co/product/die-cut-stickers/?attribute_model=Lull+DLG&attribute_color=Matte+White
d-c-fix black semi gloss vinyl (for the Bavarian RC stickers)

Useful stuff:
Pull Cord for elevator and rudder (as a spare): Flexonit 7x7 https://amzn.eu/d/gYViT2H
Crimping sleeves for pull cord (as a spare): Jenzi 8436-006, outer diameter 1.2mm, inner diameter 0.6mm https://amzn.eu/d/af5utUy
Crimping Pliers for pull cord: STMK crimping pliers https://amzn.eu/d/4xzuY5u
Masking tape (for wrapping the servos): Tesa https://amzn.eu/d/fBTBlKJ

My tools:
Sanding Block: Perma-Grit - Sanding Block SB140 Coarse/Fine 140x52mm
Sanding Block: Perma-Grit - Wedge Sanding Block WB140 Coarse/Fine 140x52mm
Sanding Block: Perma-Grit - Sanding Block SB280 Coarse/Fine 280x52mm
Dremel 3000
Cutting Machine (for vinyl): BROTHER ScanNCut SDX1000

Camera:
Sony HDR-CX730

Microphone:
Rode VideoMicPro
Rode NTUSB (for voice-over)