How to Build the VENOM-S | 3D-Printed RC Sport Jet Build Guide

Complete step-by-step build guide for the VENOM-S 3D-printed RC sport jet!
━━━━━━━━━━━━━━━━━━━━━━━

📂 Build manual and STL files:
👉 https://cults3d.com/en/3d-model/game/venom-s-r-c-3d-printed-64mm-edf-sport-jet
✈️Flight Video:
👉https://www.youtube.com/watch?v=sKq_DBM27KQ
⬇️Free Model Stand:
👉https://cults3d.com/en/3d-model/game/3d-printed-r-c-plane-stand

✈️ Don’t forget to subscribe for more 3D-printed RC jet designs, flight tests, and build tutorials!

━━━━━━━━━━━━━━━━━━━━━━━
🔧 VENOM-S – Components I used
━━━━━━━━━━━━━━━━━━━━━━━

• 64mm EDF (3300KV): https://s.click.aliexpress.com/e/_c4l0AAVn or similar
• 60/80A ESC
• 3.5mm connectors (you might need them depending on your ESC): https://s.click.aliexpress.com/e/_c2J8aQJ3
• 4S 2200mAh LiPo Battery: https://s.click.aliexpress.com/e/_c4WnIWHR or similar
• Velcro straps: https://s.click.aliexpress.com/e/_c4Evx2MV
• Receiver: 4–6 channels
• Servos [9–12g, metal gears]: https://s.click.aliexpress.com/e/_c3h7CWJj or similar
• Carbon tube [1× 500mm × 6mm]: https://s.click.aliexpress.com/e/_c3jbh7DF
• 2mm Carbon rods: https://s.click.aliexpress.com/e/_c3kmTVnf
• Linkages [1.5mm steel rods]: https://s.click.aliexpress.com/e/_c3CBP6kd
• Linkage stoppers [2.1mm diameter]: https://s.click.aliexpress.com/e/_c3zCLjgv
• Round magnets 12× (6 × 3mm): https://s.click.aliexpress.com/e/_c4rTeY2h
• Servo extensions [15cm & 20cm + Y cables]: https://s.click.aliexpress.com/e/_c4XnV7A5
• Servo reverser (only needed with 4-ch receivers): https://s.click.aliexpress.com/e/_c3gQXRKN

━━━━━━━━━━━━━━━━━━━━━━━
🌐 Community & Social
━━━━━━━━━━━━━━━━━━━━━━━

🔹 LSPlanes Official Facebook Group
https://www.facebook.com/groups/1242674790164757/

🔹 My personal Facebook profile
https://www.facebook.com/lorenzo.sardo.16/

━━━━━━━━━━━━━━━━━━━━━━━
ℹ️ Affiliate Disclosure
━━━━━━━━━━━━━━━━━━━━━━━

Some of the links above are affiliate links.
If you purchase through these links, I may earn a small commission at no extra cost to you.
This helps support the channel and future projects — thank you! 🙏

━━━━━━━━━━━━━━━━━━━━━━━
⏱️ Chapters
━━━━━━━━━━━━━━━━━━━━━━━
00:00 Introduction
01:38 Fuselage assembly
03:54 Elevator servos installation
05:57 Stabs assembly
07:12 Rudder servo installation
08:53 Wings
13:37 Elevators and rudder
15:39 EDF and ESC installation
17:41 Wings installation
18:15 Final part