DIY Solar Powered WiFi Weather Station V3.0 || Monitoring Wind and Rainfall

#DIY #WeatherStation #ESP32

Your one-stop PCB prototype Partner PCBWay: https://www.pcbway.com/

This video is about making my own Solar-powered wireless weather station by using an ESP32 Wifi Module and few common weather sensors available in the market. The weather station is fully solar-powered, so no need to worry about the external power supply. You can install it in a remote place without laying long cables to provide power.

Instructables Link: https://www.instructables.com/Solar-Powered-WiFi-Weather-Station-V30/

Order the PCB from PCBWay:

https://www.pcbway.com/project/shareproject/Solar_Powered_WiFi_Weather_Station_V3_0.html

Download the 3D printed Files for Stevenson Screen: https://www.thingiverse.com/thing:4805867

Download the 3D printed Files for Wind Sensors Mount: https://www.thingiverse.com/thing:2747523

This Weather Station is such compact weather station that consists of several meteorological sensors that measure the following parameters:
1. Internal Temperature (BME280)
2.Humidity (BME280)
3. Barometric Pressure (BME280)
4.External Temperature (DS18B20)
5. Wind Speed ( Sparkfun Weather Meter )
6. Wind Direction ( Sparkfun Weather Meter )
7. Rain Gauge ( Sparkfun Weather Meter )
8. UV Index ( SI1145)
9. Lux Level ( BH1750 )

==============================================================
Components Used:

1. ESP32 Dev Kit V1 ( 30 pins ) : https://bit.ly/3xxR4a9

2. TP4056: https://bit.ly/3t2asZo

3. Barometric Pressure sensor BME280: https://amzn.to/3aRfD8K

4. Temperature Sensor - DS18B20: https://bit.ly/3u8Uw8J

5. UV Index Sensor - GY1145:https://bit.ly/3cvuyGk

6. Lux Level Sensor - BH1750:https://bit.ly/2PkcVAq

7. Wind & Rain Sensor:https://amzn.to/3aR37Gf

8. MCP1700-3.3V:https://amzn.to/3smG9wo

9. Resistors - 2 x 1K, 1 x 10K, 3 x 4.7K, 1 x 27K, 1 x 100K :https://amzn.to/3aTUVoM

10. Electrolytic Capacitor - 1 x 100uF :https://amzn.to/3q12bUc

11. Ceramic Capacitors - 4 x 0.1uF:https://amzn.to/3uxvDEz

12. TVS Diode - DT1042-04SO :https://amzn.to/3vCN730 ( Optional )

13. RJ11 Connector: https://bit.ly/3aKPMio

14. Male / Female Headers: https://amzn.to/3pW0g39

15. Jumper Cap: https://amzn.to/316vYAF

16. Screw Terminal-2P - 5.08mm pitch:https://bit.ly/2TcNlu7

17. Screw Terminal -3P -3.5mm pitch:https://bit.ly/3m3vm8M

18. Solar Panel - 5V / 1.2Watt ( 110 x 69 mm ) - https://bit.ly/3m3vm8M

19. 18650 Battery: https://bit.ly/3w6uDrL

20. 8650 Battery Holder: https://bit.ly/2MpUlkC

21. 22 AWG Wires: https://amzn.to/3uyFeLd

23. Slide Switch :https://bit.ly/39oJjZG